This is the “Patient Cable”. It connects the Pronto to the sensors which are worn by the participant.

These are the “Rainbow“ sensors you will use. The sensors should not be discarded with other disposable waste. When all the loaded tests have been used, sensors are considered electronic waste and should be treated like cell phones or other electronic devices. Please check with your agency about their policy for disposal of electronic waste.

There are adult sensors and pediatric/slender digit sensors, but either type can be used on adults and children as long as the finger fits in the sensor snugly as described. On the top of each sensor, there are raised lines that correspond to the sensor inside. You can use these lines to line up the finger and ensure it is long enough for a successful reading.

To connect the sensor, properly orient the sensor connector and insert it completely into the “Patient Cable” connector. Completely close the protective cover. When you connect the sensor, the Pronto will tell you how many uses you have left. Each sensor can be used for the specific number of tests purchased. The tests do not expire.

When you connect the cable and sensor, ensure that there are no kinks or twists. If the cable isn’t kept straight, it may interfere with the reading.

To disconnect the sensor, lift the protective cover and pull firmly on the sensor connector. Do not pull on the cable, or you could damage it.